Model No. 900-345
Just like our Phase II analog Rockwell Hardness
Tester, the 900-345 Superficial Rockwell
Hardness Tester comprises "state of
the art" design and dynamic precision
only found at Phase II. Used for testing
thin and soft material in the Superficial
Rockwell Hardness scales, this hardness tester
is ruggedly engineered to obtain highly sensitive
and accurate readings. Conforming to ASTM
E-18 Superficial Rockwell Hardness standards,
this hardness tester will offer unmatched
repeatability in all Superficial Rockwell
Hardness scales (table shown below). A perfect
performer suited for any environment including
heat treat facilities, tool rooms, workshops,
laboratories and inspection labs. Lifetime
technical support is included with all Phase
II Hardness Testers. So test away with confidence
and a level of accuracy you will only find
at Phase II.
|
|
|
Features:
- Direct analog dial reading
- Engineered to obtain highly sensitive and accurate readings
- Conforms to ASTM E-18
- Perfect for laboratories, workshops, tool rooms, inspection labs, etc.
- For testing thin, soft material in the Superficial Rockwell scales (900-345)
Specifications:
Minor Load |
10 Kgf |
Major Load |
15 Kgf, 30 Kgf, 45 Kgf |
Test Force Application |
Dead Weight |
Test Force Control |
Manual |
Results Display |
Analog Dial Gage |
Vertical Capacity |
6.7 in. |
Throat Depth |
6.6 in. |
Height |
28 in. |
Width |
8.9 in. |
Depth |
19.6 in. |
Shipping Weight |
190 lbs |
Accessories:
- N-scale Diamond Indentor
- 1/16" Steel Ball Indentor
- 3- HRN Test Blocks
- 3-HRT Test Blocks
- Test Table 5.87" (150mm)
- Flat Anvil 2.5" (63mm)
- Spot Anvil .38" (10mm)
- Std. Vee Anvil
- Accessory Case
- Dust Cover
Options:
Scale Symbol |
Indenter Type
Ball dimensions indicate diameter |
Preliminary Force
N (kgf) |
Total Force
N (kgf) |
Typical Application |
15N |
Spheroconical Diamond |
29.42 (3) |
147.1 (15) |
Similar to A,C and D scales, but for thinner gage material or case depth |
30N |
Spheroconical Diamond |
29.42 (3) |
294.2(30) |
45N |
Spheroconical Diamond |
29.42 (3) |
441.3(45) |
15T |
Ball - 1/16" (1.588mm) |
29.42 (3) |
147.1 (15) |
Similar to B,F and G scales but for thinner gage materials |
30T |
Ball - 1/16" (1.588mm) |
29.42 (3) |
294.2(30) |
45T |
Ball - 1/16" (1.588mm) |
29.42 (3) |
441.3(45) |
15W |
Ball - 1/8" (3.175mm) |
29.42 (3) |
147.1 (15) |
Very soft material |
30W |
Ball - 1/8" (3.175mm) |
29.42 (3) |
294.2(30) |
45W |
Ball - 1/8" (3.175mm) |
29.42 (3) |
441.3(45) |
15X |
Ball - 1/4" (6.350mm) |
29.42 (3) |
147.1 (15) |
30X |
Ball - 1/4" (6.350mm) |
29.42 (3) |
294.2(30) |
45X |
Ball - 1/4" (6.350mm) |
29.42 (3) |
441.3(45) |
15Y |
Ball - 1/2"(12.70mm) |
29.42 (3) |
147.1 (15) |
30Y |
Ball - 1/2"(12.70mm) |
29.42 (3) |
294.2(30) |
45Y |
Ball - 1/2"(12.70mm) |
29.42 (3) |
441.3(45) |
|
|