Load Cell driven system provides
precise control of test force application
Direct digital reading
Engineered to obtain highly
sensitive and accurate readings
Perfect for laboratories, workshops,
tool rooms, inspection labs, etc.
Measuring Range: 8-650HBW
Innovative closed-loop technology. The
Brinell hardness tester incorporates the
latest load cell technology. The test load
is applied via a closed-loop control unit
with a load cell, a DC motor and an electronic
measurement and control unit. The result
is highly accurate Brinell hardness measurements
at all test loads up to 0.5%. The common
load overshoot or undershoot as known from
traditional dead weight, or open-loop,
systems is eliminated. The absence of mechanical
weights not only eliminates friction problems
but also makes the equipment less sensitive
to misalignments caused by vibrations.
The whole weight of the tester is 50%
less than the traditional dead weights
Test load selection by keyboard and LCD
Fully automatic test cycles. The Brinell
hardness Tester features a fully automatic
test cycle, load application, holding,
unloading, is performed fully automatically.
This greatly improves reproducibility of
test results since operator influence is
Selectable dwell times by screen. The
indenter, load, and other test information
are shown clearly on the large LCD screen.
The directions for 0.102F/D2 ratios selecting
according to the materials and hardness
range can be showing on the screen.
Equipped with a 20X optical microscope
to measure the diameter of Brinell indention.
Brinell Hardness Calculator (BHC) make
the hardness value calculation easier and